is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

How to clean a gas stove burner – Tips and Hacks

Gas stove burners are almost preferable to many chefs and home cooks also. Having a gas stove burner may give you extraordinary control over your cooking temperature. However, spills and grease splatters are unavoidable in the kitchen while cooking.

Cleaning a gas stove burner may seem scary in the first place because of its various parts. No matter what, you should not let solidified food stains spoil your sparkling kitchen surface. Nevertheless, cleaning dirt from your gas burners and grates is not as tough as it may seem. Learn a few smart strategies of how to clean gas stove burners, stove grates, and so on.

How to clean gas stove burner using Vinegar and Baking Soda

Gas stoves are easy to maintain but it is best to wipe out the cooking splashes when you make them. You need to cleanse burnt food and grease from the grates and burners on your gas burner. Fortunately, there are natural options available so that you don’t have to turn to chemical cleaners. We will be using Vinegar and Baking Soda as natural ingredients.

If your gas stove is covered in crusted on food, the acid in the vinegar will help to break down the grease. Besides, the baking soda will function as a mild scrubbing agent to eliminate the dried food.


  • Baking soda
  • White vinegar
  • Water
  • Soft Bristle Brush
  • Microfiber Cloth
  • Scrub pad

Method for Grates :

Step 1: Fill up the shallow dish with a 50:50 mix of vinegar and water. Make sure you use adequate to cover the grates when you put them in the pans.
Step 2: Put the grates in the vinegar solution.
Step 3: Let the grates sit in the solution for 30 minutes.
Step 4: Take off the grates out of the mixture and rinse them properly.
Step 5: Mix the baking soda and water into a nice thick paste and coat the grates with it.
Step 6: Allow them to sit for another 15-30 minutes.
Step 7: Use the soft bristle brush to remove encrusted food and grease.

Method for Burners :

Step 1: Spray down the burners gently with the 50:50 water and vinegar mixture, covering them well without soaking them.

Step 2 : Wait for 15-20 minutes for the mixture to sit for.

Step 3: Apply a thin coat of the baking soda and water mixture to the burners. Allow to sit the paste properly.

Step 4 : Scrub away the caked-on food using the soft bristle brush.

How to Clean Clogged Gas Stove Burners

A clogged gas stove burner may create issues by effusing low flame or no flame at all. If your clogged gas stove burner is causing you troubles, then you are definitely at the right place.


  • Dish soap
  • A Non-abrasive brush
  • Baking soda
  • Paper clips


Step 1 : Take off the burner caps

Firstly you have to check that the gas valve is closed. If it’s open, then close it for safety concerns.

After that, you can see a ceramic plate around the stove if your gas burner is of the old model. It is generally used to diffuse the flames. If you see that ceramic plate in your gas, then take it out.

Step 2: Soak the Parts after unfastening the burner head

You will see a burner head under the ceramic plate removing it. Make sure to take off it gently and sink them in water and soap mixture.

Step 3: Scrub the parts

Now with the help of a toothbrush, smoothly cleanse all the parts. If the stains are stubborn, then you can use a mixture of baking powder to clean them.

Step 4: Washout

After the cleaning, rinse all the parts with water and let them dry properly. You can clean other parts like grills in the meantime while they are drying.

Step 5: Assemble and Re-light

When all the parts get dry, then assemble it properly. Ensure that you don’t bend or damage any part. Lastly, light the burner to observe that everything is working perfectly.

How to Clean Cast Iron Stove Grates

Gas stove grates are not something that can draw your attention while cleaning your kitchen. At some point, you must have wondered how to clean the cast iron that has built up on your gas stove. Follow the methods written below point to point to clean the rust :


  • Hot water
  • Grease-fighting dish soap
  • Powder cleanser
  • Non-scratch nylon Scrubber
  • Paper towels


Step 1: Make sure that your grates are cool. If you wash your grates while they are hot, there is a possibility of cracking. Therefore, allow the grates to completely cool first and then put them in an empty sink.

Step 2: Then carefully and slowly pour the boiling water over the grates in the sink. This step is important to cut the grease.

Step 3: Now you have to fill the sink with hot water and add a squirt of dish soap. Let the grates sink in the hot water for 10-15 minutes.

Step 4: After soaking, you can use a powder cleanser to clean if you feel it necessary. For this, put a little powder cleanser on a non-scratch nylon scrubber and then rub it on left-over grease. Let the powder cleanser sit for 5 minutes on the particular tough stain.

Step 5: Rinse the grates with lukewarm water.

Step 6: Dry the grates entirely with a towel.
Ammonia can be used as a more powerful alternative to dish soap or powder cleanser. Firstly drench the grates for several hours in a covered container filled with ammonia. Wash and dry the grates properly. If you select this method- Always wear gloves, make sure that you have proper ventilation when doing the procedure, and never mix ammonia with other cleansers.

How to clean stove grates

The stove grates are the component which we recommend you to start before your big cleaning.

Step 1: Firstly remove the grates from the stovetop by lifting them up and then put together in the sink. Depending on the size of your grates and your sink, you can complete this step in batches.

If your grates are fairly clean already:

Step 2: Soap up a non-abrasive sponge and wash your grates thoroughly.

Step 3: Rinse and repeat as necessary until you get a clean and shiny stove.

If your grates are solidly dirty:

Step 4: Wash the grates initially to remove the stubborn caked grease with a soapy sponge.
Step 5: Make a mixture of 1 part vinegar with 2 parts baking soda and a few drops of dish soap.
Step 6: Allow the mixture to sit for 20 minutes. Then rinse and dry them properly.


A shiny gas stove burner can give your kitchen a sleek and modern appearance. But you have to clean all the components of your gas stove burners to get the minimalist look. If you fail to do so, you may not get proper flames to cook evenly. The system of cleaning is not that much complicated as it seems. However, you may struggle with it when leftover foods become quite dense and difficult to eliminate. You should also observe your gas stove and clean it whenever the flame becomes irregular or shows yellow color. You can maintain a polished gas stove burner by cleaning it once each week. But if you keep up the consistency, you can easily prevent the difficulty of cleaning burnt food off your gas stove burner.

Spread the love

Leave a Comment